OC
OpenClaw
Dashboard

2026-02-06-1740.md

/home/ubuntu/.openclaw/workspace/memory/2026-02-06-1740.md
Back

Session: 2026-02-06 17:40:07 UTC

  • Session Key: agent:main:main
  • Session ID: 0ff76f0c-7fea-4a5a-96b0-eafdb96963a8
  • Source: webchat

Conversation Summary

assistant: That pattern (“webchat doesn’t show up in Telegram; Telegram shows up in webchat”) strongly indicates #1:

  • No forwarding is happening.
  • The web UI is simply showing the Telegram-backed session/transcript (often because it’s the most recently active session, or the UI is focused on that session).

If it were #2 (forwarding), your “WEBCHAT TEST” would typically appear in Telegram (because something would be sending it there).

How to verify 100% (definitive)

Do this once:

  1. Send in Telegram: TG TEST A
  2. Send in webchat: WEB TEST B

Then I’ll check session keys with sessions_list and confirm whether those messages landed in:

  • the same session (UI focus/merging), or
  • two sessions (UI is just displaying the TG one by default)

Fix (so Telegram stops “showing up” in webchat UI)

The right config knob is to force separate DM sessions per channel/peer:

  • session.dmScope = "per-channel-peer"

This prevents Telegram DMs and webchat from collapsing into one “main” DM context.

If you want me to apply it, say “apply the dmScope patch” and I’ll run a gateway config.patch to set:

{ "session": { "dmScope": "per-channel-peer" } }

(We can add the extra hardening toggles after, but this one is the key for your symptom.) user: apply the dmScope patch [message_id: 07c60348-305f-46af-92f7-38acd21056aa] assistant: Applied.

  • Set session.dmScope → "per-channel-peer" in /home/ubuntu/.openclaw/openclaw.json
  • Gateway accepted the patch and triggered a reload/restart signal (SIGUSR1, ~2s delay)

What to do now:

  1. Refresh the web UI.
  2. Send a new Telegram message and confirm it no longer appears inside the webchat thread (it should show up as a separate Telegram session/thread instead).

If it still “bleeds through”, tell me what you see in the UI (screenshot helpful) and I’ll check the active sessions (sessions_list) to confirm the new session keys being created. user: System: [2026-02-06 17:20:19 UTC] GatewayRestart: { "kind": "config-apply", "status": "ok", "ts": 1770398417101, "sessionKey": "agent:main:main", "message": "Isolate DM sessions by (channel, peer) so Telegram DMs don't appear in webchat UI transcript.", "doctorHint": "Run: openclaw doctor --non-interactive", "stats": { "mode": "config.patch", "root": "/home/ubuntu/.openclaw/openclaw.json" } }

why am i seeing two sessions with the same key now - S L id:8433292660 [message_id: eab8c9b8-c99c-402d-8ace-2a09ba09650a] assistant: They’re not actually the same key — the UI is just making it look that way because the display name is the same.

Here’s what OpenClaw sees right now (from sessions_list):

  • Webchat session

    • key: agent:main:main
    • channel: webchat
    • displayName: S L id:8433292660
    • deliveryContext.to: 8433292660

  • Telegram DM session

    • key: agent:main:telegram:dm:8433292660
    • channel: telegram
    • displayName: S L id:8433292660
    • deliveryContext.to: telegram:8433292660

So the patch worked: Telegram is now in its own scoped session key (agent:main:telegram:dm:...).

Why does webchat show id:8433292660 then?

Because your webchat “peer id” (the web UI’s notion of who you are) is currently 8433292660, so it renders the same displayName string. That’s just UI labeling; it doesn’t mean Telegram is still merged.

This can happen if:

  • the web UI stored an identity/user id in localStorage/cookie (and it happens to be that number), or
  • you previously opened the UI in a way that “attached” to that identity.

How to cleanly separate it in the UI

Do one of these:

  1. Hard refresh + clear site data for the Control UI domain (cookies + local storage), then reopen.
  2. Open the Control UI in an incognito/private window (fastest way to force a new webchat peer id).

After that, webchat should show a different displayName/id, and you’ll stop seeing the confusing “duplicate name”.

Quick sanity test

Send:

  • Telegram: TG AFTER PATCH
  • Webchat: WEB AFTER PATCH

They should land in different sessions (and not appear in each other).

If you want, paste what the UI shows for the two sessions’ keys (or screenshot), and I’ll tell you which one to use as your “main” webchat thread going forward. user: System: [2026-02-06 17:26:02 UTC] Cron: Run summary — Automatic Coding Agent (cron:206f6ddf)

What I did

  • Acquired the run lock successfully.
  • Reclaimed stale in-progress items (none found).
  • Found unprocessed "Ready for work" issues and selected the first:
    • elite-flacco/openclaw-dashboard#17 — add markdown component to properly render markdown files
  • Attempted to mark the issue In progress (local state + Project board).

Problem encountered

  • Updating the GitHub Project board failed due to insufficient gh token scopes:
    • Error: updateProjectV2ItemFieldValue requires the 'project' scope.
    • Current token scopes (reported by gh): ['gist','read:org','read:project','repo','workflow'].
  • The local-state mark step succeeded (the script reported added: 1) but the Project API call failed, so the Project board was NOT updated.

Actions taken

  • Sent you a Telegram message (to target 8433292660) with the failure details and next steps.
  • Released the run lock.

Why I stopped

  • The robustness rules require marking the project item In progress immediately and reliably. Because the GH token can't update the Project board, proceeding to clone the repo / change code would leave the project board inconsistent. To avoid that, I stopped after notifying you.

Suggested next steps (what you can do)

  1. Add the 'project' scope to the GitHub PAT used by gh on this host:
    • Update token scopes at https://github.com/settings/tokens (grant 'project'), or create a new token with the 'project' scope and configure gh to use it (gh auth login / gh auth refresh).
  2. Re-run the cron (it will acquire the lock and continue). The script already marked the issue In progress in local state; if you prefer, you can manually clear that state or let the reclaim logic requeue it after the TTL.
  3. If you want, I can re-run now once you confirm the token is updated.

If you'd like, I can:

  • Retry immediately (after you update the token),
  • Or continue and implement the issue automatically (clone, branch, implement, open PR) once project…

ok i did a hard refresh that seemed to have worked [message_id: 52e2e08b-cb21-4d39-9ab0-9d6fa6567f7c] assistant: Good — that matches what I expected. Hard refresh cleared the UI’s cached “who am I” / session attachment, so webchat stopped “looking like” the Telegram thread.

Two quick follow-ups:

1) Telegram/webchat isolation status

With session.dmScope = "per-channel-peer", you should now consistently get:

  • Telegram DM → session key like agent:main:telegram:dm:<id>
  • Webchat → agent:main:main (or a separate webchat-specific key depending on UI)

So that part is solved.

2) Cron watcher is now blocked on GitHub token scopes (project)

The cron run just found a real “Ready for work” item (openclaw-dashboard#17) but stopped correctly because gh can’t update the GitHub Project board:

  • needs: project scope
  • current scopes: gist, read:org, read:project, repo, workflow (missing project)

What you need to do on the host

Update the PAT used by gh to include the project scope (classic PAT), then refresh gh auth.

If you want, I can walk you through the exact commands to run (and verify scopes) — tell me which auth method you’re using right now:

  • Did you set GH_TOKEN env var?
  • Or did you gh auth login (stored credentials)?

If you paste the output of:

gh auth status

(I only need the part that shows which account + how it’s authenticated), I’ll tell you the fastest fix. user: ubuntu@ip-172-31-21-143:~/projects/openclaw-dashboard$ gh auth status github.com ✓ Logged in to github.com account elite-flacco (/home/ubuntu/.config/gh/hosts.yml) - Active account: true - Git operations protocol: https - Token: gho_************************************ - Token scopes: 'gist', 'read:org', 'read:project', 'repo', 'workflow' [message_id: 6114d667-872c-44cf-9393-8a795123a6d3] assistant: You’re authenticated via a classic PAT stored in ~/.config/gh/hosts.yml, and it’s missing the project scope. You need to either (A) mint a new PAT with project, or (B) expand the scopes on the existing one (GitHub doesn’t let you edit scopes on an existing classic PAT — you create a new token).

Do this:

1) Create a new classic PAT with project

Go to: https://github.com/settings/tokens/new

Select scopes:

  • project (this is the missing one)
  • keep what you already have: repo, workflow, read:org, gist (and read:project is fine too)

Copy the token.

2) Update gh to use the new token

On the EC2 host, run:

gh auth login --hostname github.com --with-token

Then paste the new token and press Enter (it won’t echo).

3) Verify scopes

gh auth status

You should now see project included in the scope list.

4) Re-run the watcher

Once scopes are fixed, tell me and I’ll trigger a manual run (or you can wait for cron). The watcher should then be able to mark the Project item In progress and proceed.

If you want, after you update the token I can also clean up the watcher local state if it got into a weird “in progress locally but not on the board” situation—but usually the reclaim/TTL logic will handle it. user: i didn't authenticate with a token before though [message_id: 7bd83ea7-f6f6-46ad-ac85-73047c5c9cbe] assistant: You did — just indirectly.

gh auth status is showing:

  • Logged in (credentials stored in /home/ubuntu/.config/gh/hosts.yml)
  • Token: gho_********
  • Token scopes: gist, read:org, read:project, repo, workflow

So gh is currently using a GitHub token (a PAT or similar token) under the hood. Even if you never manually copied one in, one of these happened:

  • you ran gh auth login at some point and completed a browser/device flow, and GitHub issued a token for gh, or
  • you (or a setup script) set it up earlier and it persisted in hosts.yml.

Either way, the fix is the same: the token gh has doesn’t include the project scope, and GitHub Projects mutation requires it.

What you should do now (most reliable)

  1. Create a new Classic PAT with project scope: https://github.com/settings/tokens/new

  2. Tell gh to use it:

gh auth login --hostname github.com --with-token

Paste token → Enter.

  1. Confirm:
gh auth status

You should see project in the scopes list.

Alternative (sometimes works, but often doesn’t add project)

You can try:

gh auth refresh -h github.com -s project

If that succeeds and the scopes update, great. If it errors or the scope list doesn’t change, fall back to the “new PAT + with-token” method above.

If you paste the output of gh auth refresh -h github.com -s project (just the text), I’ll tell you immediately whether it worked. user: ok i did gh auth refresh -h github.com -s project and that seemed to have worked [message_id: b3fadc9c-e014-41d0-b983-50ab50de7ea1] assistant: Nice — confirmed on the host: your token scopes now include project:

Token scopes: 'gist', 'project', 'read:org', 'repo', 'workflow'

So the watcher should be able to update the GitHub Project board again.

Want me to trigger the watcher run now so it retries claiming elite-flacco/openclaw-dashboard#17 and proceeds? user: Can we just wait until it runs the next time? [message_id: 9d4083bf-ca04-4ddc-a0c9-4b5915636380] assistant: Yep—waiting is fine.

On the next scheduled cron run, it should:

  1. acquire the lock
  2. re-check “Ready for work”
  3. successfully set the Project item to In progress (now that project scope is present)
  4. continue with whatever automation steps come next.

One caveat: the last run already marked it “in progress” in the watcher’s local state but failed to update the board. If your watcher has a TTL/reclaim step (it does), it should either reclaim/repair that state or re-attempt the Project update cleanly next run.

If next run still bails, paste the run summary and I’ll adjust the watcher logic to “repair” the Project status when local state says it’s claimed.